Tools‎ > ‎

Alignment Camber Tool

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               Send comments to                                                                             

Other Links

Alignment Camber


I have a magnetic base camber gauge that came with a used tool box I purchased at a garage sale.  It appeared to be a viable option for use on my Miatas.  So, my son and I made a tool that can be placed against an OEM 15" Miata wheel.

The tool is made from scraps of steel left over from the string jig and a couple of pieces of angle iron that came from Tractor Supply.  We welded it together and painted it with silver wheel paint to match the string jig.




I also used a homemade water level to check the level of my garage floor.  It was level on three wheel locations and 1/2" low on one.  I can use floor tiles and one piece of 1/2" plywood to use to level my cars to check the camber.


With the string jig and the camber tool I can do a basic alignment.



Vendor Links