N. Frame Rail Straightening Part #7

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               Send comments to mostlymiata@gmail.com                                                                             


Other Links




Frame Rail Straightening

Part #7


I have now spent two full days working on the front end of the car.  


Here are pictures of the completed passenger's side.


MM 00 EVO Body welds2 1



MM 00 EVO Body welds2 2



I plugged the hole I had drilled in the driver's side rail with two fender washers bolted together.  After welding the perimeter, I melted the bolt in the middle to plug the bolt hole. Then I ground the welds down flush.  It looks pretty good.  It is normally out of sight so this will do.



MM 00 EVO Body welds2 3



MM 00 EVO Body welds2 4



I then removed the two front radiator shield mounts from the old bent parts.  I had to straighten them and then hold them in place with the aluminum radiator shield.  Then I welded them into place and primed them.


MM 00 EVO Body welds2 5



MM 00 EVO Body welds2 6



The aluminum shield fits!


MM 00 EVO Body welds2 7



MM 00 EVO Body welds2 8



I think I am finally finished with the welding.  Now I need some color!

 

 


Vendor Links







Comments